China manufacturer New Desigr Excavator Earth Soil Auger Auger Drilling Machine for Tree Planting and Post Pole Auger pto shaft carrier bearing

Product Description

Product Parameters

Drilling diameter (mm) 200-400
Propulsion stroke (m) 3.3
Working pressure(Mpa) 1.7-3.3
weight (T) 20T
propulsion mode impactor
Punching speed 0.8-1.2 meters/minute
Drill pipe length(m) 3/6
Operation method pilothouse

 

Product Description

 

Product parameter

Model :90/105/140-300MM
Applicable rock :F=6-20
Drilling diameter :90~300MM
Working air pressure :0.7-2.4MPA
Air consumption :7-21M3/MIN
Impactor :CIR, DHD
Rotation speed of power head :0-70RPM
Power head output torque rejection :36006500(N-M)
Drilling depth :3-30M
Drill pipe length (optional):2; 3; 4:6; 9M
Track travel (optional):2; 3; 4. 6; 9M

CHINAMFG to drilling is a combination of hydraulic excavators and rock drilling rigs, which solves the problems of single excavation function and the need for air compressors to drag in the past. Based on the mature technology of excavators and lower operating costs, this type of drilling rig not only has reliable quality and powerful functions, but also significantly reduces the cost of purchase and use. Its components include rock drilling head, hydraulic control system, hydraulic power air compressor, feed system, dust prevention system, and excavator platform, which have stronger mobility and more favorable prices.

 

A new type of highly integrated down-the-hole drilling machine, which utilizes the original excavator power and is equipped with a hydraulic valve group without damaging the original working performance of the excavator. At the same time, it is equipped with a multi specification diesel powered screw air compressor and a device that utilizes wind pressure impact drilling; After the equipment renovation is completed, drilling is flexible, convenient, and quickly improves the usage rate of excavators.

 

Installing a highly reliable self-locking lifting motor ensures the smooth operation of the drilling rig. The installation of a rapid descent system greatly reduces the idle drilling time when encountering interlayer failure during drilling, and prolongs the service life of the rock drill. Install the drilling arm on the small arm and add a dual rotation+compensation oil cylinder to meet the needs of multi angle and wide range drilling.

 

This model is a combination of excavator, air compressor, and down-hole drilling rig

 

Suitable for photovoltaic construction in complex terrains, highway guardrails, geological exploration, and other complex terrains. 

 

 

This machine can also be customized with air compressor size, tower size, excavator size, and the price may vary depending on the customization. 

Other Product

product/NnUpdKSxhTrv/China-Whdrill-Truckwater-Well-Drilling-Truckdrilling-Platform.html

 

Company Profile

Wanhai Machinery Co., Ltd., situated in HangZhou, ZheJiang , is a reputable manufacturer specializing in the design, development, production, and distribution of top-notch drilling machinery and equipment. Our extensive product range encompasses a variety of drilling rigs, including oil and gas drilling rigs, water well drilling rigs, core drilling rigs, and more, catering to diverse drilling tasks and scenarios. Our unwavering commitment lies in delivering exceptional products and services that are tailored to meet the specific requirements of each customer. We take pride in our dedicated after-sales team, who promptly and effectively address any concerns or issues that may arise, ensuring utmost customer satisfaction.
We eagerly anticipate establishing enduring, reliable, and mutually beneficial relationships with every customer we serve. Should you express interest in our products, please do not hesitate to reach out to us. We assure you that our team will provide you with the necessary information and assistance to make an informed decision.

At Wanhai Machinery Co., Ltd., we prioritize quality and innovation in all aspects of our operations. Our state-of-the-art manufacturing facilities, coupled with our team of experienced professionals, enable us to consistently deliver drilling machinery and equipment of the highest standards. We stay abreast of the latest technological advancements in the industry, ensuring that our products are at the forefront of efficiency and performance. Furthermore, we understand that each drilling project comes with its unique set of challenges and requirements. Therefore, we offer customized solutions to cater to the specific needs of our customers.
 

 

 

Foreign customer

 

FAQ

1. Are you a trading company or a manufacturer?
We are a professional manufacturer. Our factory mainly produces water well drilling rigs, core drilling rigs, down-the-hole drilling rigs, pile drivers, etc. The products have been exported to hundreds of countries around the world and enjoy a high reputation all over the world.

2.How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video inspection.

3.How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 15-20 days.
3) In the case of customization, we can deliver the machine within 25-30 days.

4. What’s your terms of payment?
T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Technical Services
Warranty: Online Technical Services
Certification: ISO 9001:2000, ISO 9001:2008
Condition: New
Drill Hole Diameter: >300mm
Drill Hole Depth: 10-30m
Customization:
Available

|

Customized Request

post hole digger

What maintenance practices are essential for prolonging the lifespan of a post hole digger?

Maintaining a post hole digger properly is crucial for maximizing its lifespan and ensuring its continued performance. Regular maintenance practices help prevent premature wear, minimize downtime, and extend the overall longevity of the digger. Here are some essential maintenance practices for prolonging the lifespan of a post hole digger:

  1. Cleaning: After each use, it is important to clean the post hole digger thoroughly. Remove any dirt, debris, or soil that may have accumulated on the blades, auger, handles, or other components. Use a brush or hose to remove stubborn dirt. Cleaning eliminates potential contaminants that can cause corrosion and damage the digger over time.
  2. Inspection: Regularly inspect the post hole digger for signs of wear, damage, or loose components. Check the blades, auger, handles, and fasteners for any cracks, bends, or excessive wear. Ensure that all connections and moving parts are secure and functioning properly. Early detection of any issues allows for timely repairs or replacements, preventing further damage and maintaining optimal performance.
  3. Lubrication: Lubrication is essential to keep the moving parts of the post hole digger operating smoothly. Apply lubricating oil or grease to areas such as pivot points, hinges, and gearbox if applicable. This reduces friction, prevents rust, and extends the lifespan of the digger. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.
  4. Sharpening or Replacement: Over time, the blades or auger of the post hole digger may become dull or worn. Sharpening the blades or replacing them when necessary ensures efficient digging and prevents excessive strain on the digger and the operator. Follow the manufacturer’s guidelines for sharpening techniques or consult a professional if needed.
  5. Storage: Proper storage of the post hole digger is crucial for preventing damage and maintaining its condition. Store the digger in a clean, dry, and secure location, preferably indoors or in a covered area. Protect the blades and auger from moisture, which can cause rust. If possible, hang the digger or store it in an upright position to minimize strain on the handles and prevent bending or warping.
  6. Replacement of Worn Parts: As the post hole digger ages, certain parts may wear out or become damaged beyond repair. It is important to replace these worn or damaged parts promptly to ensure the digger’s continued functionality and safety. Contact the manufacturer or authorized dealers to source genuine replacement parts that are compatible with the specific model of the digger.
  7. Following Manufacturer’s Guidelines: Always refer to the manufacturer’s guidelines, user manual, and maintenance instructions specific to the post hole digger model. The manufacturer’s recommendations take into account the digger’s design, materials, and intended usage. Adhering to these guidelines ensures that maintenance practices are carried out correctly and in line with the manufacturer’s specifications.

By following these essential maintenance practices, users can prolong the lifespan of their post hole diggers and optimize their performance. Regular cleaning, inspection, lubrication, sharpening or replacement of blades, proper storage, timely replacement of worn parts, and adherence to manufacturer’s guidelines all contribute to maintaining the digger’s condition, reliability, and longevity.

post hole digger

How do post hole diggers ensure controlled and precise digging in tight spaces?

Post hole diggers are equipped with various features and techniques to ensure controlled and precise digging in tight spaces. These elements allow users to navigate limited areas and maintain accuracy during the digging process. Here’s how post hole diggers achieve controlled and precise digging in tight spaces:

  1. Compact Design: Post hole diggers are designed to be compact and maneuverable. They typically have a narrow frame and a slim profile, allowing them to fit into tight spaces where larger machinery or tools may not have access. The compact design enables operators to position the digger accurately and maintain control while digging in confined areas.
  2. Shorter Shaft Length: Some post hole diggers feature shorter shaft lengths compared to standard models. The shorter shaft allows for better control and maneuverability in tight spaces. By reducing the overall length of the digger, operators can more easily navigate around obstacles and maintain precise digging movements without compromising stability.
  3. Adjustable Handle Positions: Many post hole diggers have adjustable handle positions. The handles can be repositioned or rotated to suit the operator’s preference and the specific requirements of the tight space. By adjusting the handle position, operators can maintain a comfortable grip and optimize control while working in confined areas.
  4. Operator Technique: The technique employed by the operator is crucial in achieving controlled and precise digging in tight spaces. Skilled operators can utilize specific techniques such as careful hand placement, controlled force application, and precise movements to navigate around obstacles and maintain accuracy. With practice and experience, operators can adapt their technique to the limitations of tight spaces, ensuring controlled and precise digging.
  5. Graduated Markings or Measurements: Some post hole diggers feature graduated markings or measurements on the shaft or handle. These markings serve as visual references for the operator, allowing them to monitor the depth and progress of the hole while working in tight spaces. By referring to the measurements, operators can ensure consistent and precise digging depths, even in limited areas.
  6. Manual Control: Manual post hole diggers offer a high level of manual control, which can be advantageous in tight spaces. By physically operating the digger and exerting force directly, operators have fine control over the speed, direction, and depth of the digging process. The ability to make subtle adjustments on the spot enables controlled and precise digging, particularly in areas where precision is critical.

Through their compact design, shorter shaft lengths, adjustable handle positions, emphasis on operator technique, graduated markings or measurements, and manual control, post hole diggers ensure controlled and precise digging in tight spaces. These features and techniques allow operators to navigate around obstacles, maintain accuracy, and achieve the desired hole dimensions even when working in confined areas.

post hole digger

Can you explain the different types of post hole diggers available?

There are several types of post hole diggers available, each designed for specific purposes and varying levels of manual effort. Here are some of the common types:

  1. Manual Post Hole Digger: This is the most basic type of post hole digger and is operated purely by human force. It consists of a long shaft with handles at the top and two auger blades at the bottom. Manual post hole diggers are suitable for smaller digging tasks and require physical exertion from the operator.
  2. Two-Person Post Hole Digger: Also known as a dual-handle post hole digger, this type requires two people to operate. It features longer handles to provide better leverage and stability. By having one person stabilize the digger while the other applies downward force, two-person post hole diggers make it easier to dig deeper and wider holes compared to a single-person manual digger.
  3. Clamshell Post Hole Digger: This type of digger has a hinged jaw-like mechanism instead of auger blades. The two halves of the clamshell digger close together when forced into the ground, and when lifted, they bring the soil along with them. Clamshell post hole diggers are useful for digging in loose or sandy soil where augers may not be as effective.
  4. Power Auger: Power augers are mechanical post hole diggers that are either gas-powered or electric-powered. They feature an engine or motor that drives the rotating auger blades into the ground. Power augers are more efficient and require less physical effort compared to manual diggers. They are suitable for larger digging tasks or when working with compacted or rocky soil.
  5. Hydraulic Post Hole Digger: Hydraulic post hole diggers are heavy-duty machines commonly used in construction or industrial settings. They are typically attached to tractors or other heavy machinery and utilize hydraulic power to drive the auger blades into the ground. Hydraulic diggers are capable of digging large and deep holes quickly and efficiently.

When choosing a post hole digger, factors such as the size of the holes needed, the type of soil, and the available physical strength or equipment should be taken into consideration. Each type of post hole digger has its advantages and is suited for different applications, so selecting the right one will ensure efficient and successful digging.

China manufacturer New Desigr Excavator Earth Soil Auger Auger Drilling Machine for Tree Planting and Post Pole Auger   pto shaft carrier bearingChina manufacturer New Desigr Excavator Earth Soil Auger Auger Drilling Machine for Tree Planting and Post Pole Auger   pto shaft carrier bearing
editor by CX 2024-05-15

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *