electric motor shims

Ever-Power Items manufactures shims for a variety of electrical motors, both huge and small. Predicated on the NEMA body, Ever-Power offers regular 2” X 2” up to 5” X 5” shims, or can generate tailor made shims for larger or special motor applications. Some of these motors consist of Westinghouse, WEG, Baldor, Mitsubishi, Waukesha and Caterpillar. Shims are accustomed to correctly align the engine to a pump or various other application, in order to avoid bearing and coupling failure due to vibration. Leaf Chain Having great shaft alignment is paramount to having equipment operate smoothly and extend their lifestyle.
Explanation of Hydraulic Rock Splitting Machine
1. Hydraulic rock splitter is maninly made up of power pump pack and hydraulic cylinder. Mainly relevant to the secondary breaking;
2. 1st drill hole in rock, then insert hydraulic cylinders which can be include wedge and feathers, Start engine to provide hydraulic pressure;
3. Repeat the process until the whole structure is fractured into smaller sections and prepared for removal.
Rock splitting wedge
Rock splitting wedge is usually some sort of manual tools that uses manpower to influence the steel wedge into holes on rock, thereby split rock. Rock splitting wedge mainly utilized in splitting cracked rock and arch rock which by utilizing a wedge set can be separated into smaller or standard stone blocks. Rock splitting wedge for splitting stone can also trim relative huge and irregular rock blocks.
The stone is often broken into a lot of pieces, so that the utilization rate of stone is significantly less than 30%.That’s, the mining of stone is labor, time, but also caused a great waste of resources.If the use of splitting machine mining, so long as the rock to be mined on the surface of a few holes plus some grooves, and after that utilize the splitting machine split under the rock.If the same mining 10 meters long, 6 meters wide, 6 meters high rock, only 10 holes, a complete length of 60 meters.

It contains two parts: hydraulic pump station and splitter. The cylinder is definitely powered by the ultra-high pressure essential oil output from the pump station. After mechanical amplification, the split object could be split in the predetermined direction.Product features:
Splitting procedure without vibration, no impact, no noise, no dust, a few seconds to comprehensive the splitting, single big splitting force up to 5,000 tons, can control the splitting, dismantling, splitting size, light-weight, simple operation, easy maintenance can be used in indoor and narrow site demolition work can be used for underwater construction.
App of Hydraulic Rock Splitting Machine

1. Split all sorts of natural stones, rock, granite, marble mining & quarrying;
2. Remove redundant reinforced concrete structures, concrete machine beds and plinths etc;
3. Underwater demolition & Demolition in a limited space;
4. Controlled demolition of pillars, concrete and wall space where heavy apparatus is impractical.
1. Hydraulic rock splitter is maninly made up of power pump pack and hydraulic cylinder. Mainly applicable

to the secondary breaking. Initial drill hole in stone, then insert hydraulic cylinders which is include wedge and feathers. Start engine to provide hydraulic pressure. Replicate the process until the whole structure is definitely fractured into smaller sized sections and prepared for removal.

2. Remove redundant reinforced concrete structures, cement machine beds and plinths etc.

3. Split all sorts of natural stones, rock, granite, marble mining & quarrying.

4. Now additionally it is trusted in mineral mining(cave mining) , civil engineering structure and demolition. Additionally it is an essential tool in building, river dredging, salvation etc.
Top features of Hydraulic Rock Splitting Machine

1. Enormous splitting force up to 500 tons & vibration free;
2. Dust free and near silent procedure & Light-weight and Easy handling;
3. Different sizes of counter wedge and middle wedge can use on the same splitter.
1. Safe. Static demolition, no noise and no dangers to workers.

2. Environmental. Splitting slowly and power, no pollution to the environment.

3. Economical. Cost-effective and high performance, consistently working without maintenance.

4. Precise. Splitter could possibly be devote electric motor shims china pre-drilled holes and split in accordance to precise directions, shapes and sizes.

5. Convenient. Device with special design, pulley with wheels, wedge with handles, relieve and convenient for employee to operate.
Splitting wedges and shims meant for Darda rock splitter

It really is our newly developed products for quarrying and civil construction, which is principally applicable to the secondary breaking of large boulders, squaring breaking of large boulders ,squaring blocks. its great points are easy procedure, and splitting so quickly, only need several sends.


1)Enormous splitting force up to 410 tons

2)Dust free and near silent operation

3)Vibration free

4)Light weight

5)Precision work

6)Always controllable

7)For use in close quarters and hard to gain access to places.

8)Easy handling
the vane is one of the core of oil pump’s parts. Vane Essential oil Pump is trusted in Automobile VCT; Except Vane essential oil Pump meets the automobile lubrication demand, it can save more energy comparing ration pump, and yes it increases the safety under the hot idel velocity and temperature and high acceleration comparing regular adjustable pump.


Post Digger Co., Ltd.

As one of leading post digger manufacturers, suppliers and exporters of mechanical products, We offer post digger and many other products.

Please contact us for details.

Mail: sales@postdigger.xyz

Manufacturer supplier exporter of post digger


Recent Posts