Energy UNITS FOR LIFT TABLE

Energy UNITS FOR LIFT TABLE 1
Standard Description
This electrical power unit is designed solely for the smaller lift table,Consisting of high stress gear pump, AC motor, multi-functional manifold, valves, tank, and so forth. This power unit continues to be widely applied while in the sector of logistic units for instance minifork lift, scissors lift and ariel operating platforms. The lower-ing movement is controlled through the solenoid valve using the speed managed from the adjustable needle valve.
Energy UNITS FOR LIFT TABLE 2
Standard Description
This energy unit is designed solely to the medium lift table, Consisting of hugely effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The decreasing motion is actived from the solenoid valve plus the speed managed through the adjustable needle valve. When the lift rises to a high positoin, however the power supply is lower, the lowering motion is controlled from the guide override perform.
Energy UNITS FOR LIFT TABLE three
Standard Description
This electrical power unit is developed solely for the big lift table, Consisting of extremely effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing movement is actived through the solenoid valve and the speed controlled by a stress compensated flow control valve.
Power UNITS FOR LIFT TABLE four
General Description
This energy unit is created exclusively to the significant lift table, Consisting of really effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing motion is actived through the solenoid valve along with the velocity controlled from the adjustable needle valve. Once the lift rises to a substantial positoin, but the electrical power provide is minimize, the lowering motion is controlled by the guide override perform.
Unique Notes
one. This electrical power unit is of S3 duty cycle, which can only function intermittently and repeatedly, i.e. one minute on and 9 minutes off.
two. Clean every one of the hydraulic elements concerned in advance of installation of the energy unit.
three. Viscosity on the oil shoud be 15~46 cst,which should really also be clean and cost-free of impurities.N46 hydraulic oil is encouraged.
4. Oil shifting is needed just after the initial 100 operation hrs,afterwards the moment each and every 3000 hours.
5. The energy unit proven is designed to be mounted vertically.

Tags:

Post Digger Co., Ltd.

As one of leading post digger manufacturers, suppliers and exporters of mechanical products, We offer post digger and many other products.

Please contact us for details.

Mail: sales@postdigger.xyz

Manufacturer supplier exporter of post digger

 

Recent Posts