The EP Greenhouse geared motor is a compact and lightweight reduction gear motor with a limit switch system that’s ideal for assembly of a locally available electric engine. The geared motor is utilized in manually-controlled or climate-managed ventilation and display systems in greenhouses. The quick and easy-to-install EP gear reducer is certainly rainproof and windproof. The gear reducer includes a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is locked when the decrease gearbox isn’t running. The fully sealed reduction gearbox comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all situations, even at high temps. Thanks to the use of an expansion chamber, the geared motor can be installed in any position. There are no limitations, since there is no need for a bleed plug. The sealed reduction gear motor keeps the apparatus essential oil of the geared motor in optimal condition because of its entire operating lifetime. The gear motor is suitable for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction geared motor comes with an FT85 motor assembly flange, on to which the right IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an included chamber and is certainly enclosed by an impact-resistant plastic cover. The limit change system is accessible and simple to adjust. The limit change system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).