helical worm gear motor

Helical-worm gearmotors
Due to their style and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. They are also extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you anticipate a drive option to impress you using its high level of performance and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP for you. These can be implemented separately in the modular system. In this way, they offer you a massive range of sizes, gear ratios and electric motor sizes.
However, their greatest strength is definitely their running smoothness and their extremely low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a robust drive solution that you will hardly actually hear.
The overall concept offers you many more practical product characteristics and benefits. These include the significantly higher efficiency of the helical-worm combinations as opposed to single helical-worm gear devices. This is one way you save additional energy in the operation of your systems and are in a position to noticeably reduce ongoing working costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide range of AC motors. In addition, you can freely configure all of the relevant properties. In this way, you can effectively utilize all the benefits offered by this combination of low-noise helical-worm gear unit and performance-optimized motor. Even greater variance may be accomplished because of the optional flange or foot-mounted style and by choosing between solid and hollow shaft.
Save money and time
By opting for among our gearmotors, you already are saving time and money with this selection and project planning. The reason being our modular system enables a multitude of mixture options for gear devices and motors. You can consequently reduce operating costs, depend on an extended service life and benefit from simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional toughness and long service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft attach or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear systems are helical/helical-worm combinations, so they are more efficient than normal helical-worm equipment units. Due to their outstanding performance, these drives can be used in every industrial sector and tailored to individual torque and rate requirements. The decrease ratios afforded by the helical-worm equipment stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel materials with unique lubricants, optimized form, this powerful motor achieves high levels of effectiveness and torque. The casing machined on all sides allows diverse mounting options. Double chamber shaft seals are used as standard.
The low contour design makes it suitable for implementing applications e.g. in the meals industry. The housing has no helical worm gear motor recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and ground worm gears: Provides higher efficiencies and better torque capacity in smaller sizes.
Multiple Input Options: Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, mounting pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Keeps contaminants and water away.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors set new requirements for reliability, efficiency and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design offers easy integration right now and a future proof option. The EP gear electric motor offers total versatility in mounting options includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in choice positions rotated in 90º steps around the motor frame offering for unparalleled integration options.
EP gear motors adhere to North American and International specifications, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a true total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dust tight and hose proof,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique mixture of optimized worm wheel materials with unique lubricants and optimized shape, this powerful geared motor achieves high degrees of effectiveness and torque. The reduced contour design makes it suitable for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The usage of condition of the art helical and worm gear combinations affords optimum functionality fulfilling a wide variety of ratio requirements. The 800 BR is certainly functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All devices shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting result shafts
Dual and triple reduction ratios
Flanged or foot mounted
All models adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared engine. A favorably priced substitute for the standard duties anticipated of a right-angle drive.
5 equipment sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC engine are directly flange mounted, the pinion is on the engine shaft. This integrated small design can be an essential element for the high accuracy and the remarkable stiffness of EP geared motors.
For vector-controlled inverter operation usage of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are produced from case hardened alloy metal and the flanks are precision ground. The worm tires are made from particular wear-resistant bronze. Helical worm gears include a helical gear. Worm gears with shrink disc, torque limiter, in addition to adjustable backlash designs are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall performance gearboxes in universal style. The housings are manufactured from top quality cast iron. The rugget walls and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with rugged walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG