How to connect O-ring Chains Remarks to connect common O-ring Chains

1.A connecting website link of an O-ring Chain for basic application is pre-coated with grease on the pins. Before connection, confirm the grease around the surfaces of pins, and when the quantity of grease is small, apply grease with bare hands. (If gloves are made use of, the grease will be absorbed through the gloves.)
Illustration: Once the connecting link (I) of an O-ring chain for common application is
shipped, O-rings are fitted in the roots from the pins. In case the O-rings come loose as a consequence of vibration through transport, refit the O-rings in for the roots of the pins.
In this case, be sure you return the grease collected at the roots from the pins for the central surfaces with the pins, more at portion A than at portions B shown in the over illustration. (Portions A is worn due to sliding together with the bushings.)
two.The chain may be most conveniently connected on the teeth of a sprocket. Engage the backlinks at both ends from the chain with the sprocket teeth and match connecting pins. In case the sprocket is usually moved, the chain can also be linked to the loosened side.
three. Connecting method
1.Confirm that O-rings are connected on the roots with the pins.
2.If the level of grease utilized within the connecting pins is smaller, coat the pins with grease with the central portions.
3.Insert the connecting pins to the bushings in the inner backlinks at each ends.
four.Verify that the grease is applied for the total face from the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and although pressing the connecting plate, set up the spring clip. Confirm whether the head (the finish without a split) on the spring clip is turned during the feeding path on the chain. (See the next illustration.)
six.Make sure you verify that the spring clip is securely fitted within the clip grooves with the connecting pins.
This completes jointing of your connecting link. Note that grease about the surfaces of connecting pins and O-rings can be eliminated during installation do the job. In this case, re-grease employing the grease about the surface of your base chain or even the grease during the polyethylene bag during which the connecting website link was contained.

Tags:

Post Digger Co., Ltd.

As one of leading post digger manufacturers, suppliers and exporters of mechanical products, We offer post digger and many other products.

Please contact us for details.

Mail: sales@postdigger.xyz

Manufacturer supplier exporter of post digger

 

Recent Posts