Materials Handling Power UNIT 1
This energy unit is made to the fork lift marketplace, consisting of very effective gear pump, DC motor, guide raise and reduced valve, tank, ect. The up and down motion are managed from the lever with the guide release valve, and that is outfitted with an electric switch to activate the motor. The lowing speed is managed from the strain compensated movement handle valve.
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned before installation of the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and absolutely free of impurities, N46 hydraulic oil is proposed .
four. Oil shifting is needed just after the original 100 operation hrs, afterwards once each 3000 hours.
5. The electrical power unit proven is designed to be mounted horizontally.
Material Dealing with Power UNIT 2
This energy unit functions electrical power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing motion is activated from the solenoid valve together with the lowering pace managed from the strain compensated flow control valve. Merchandise of this series is often extensively utilized in the field of logistic products for instance fork lift, mini lift table, and so on.
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic components concerned in advance of mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and cost-free of impurities, N46 hydraulic oil is advised .
four. Oil altering is required immediately after the preliminary one hundred operation hrs,afterwards when each and every 3000 hrs.
five. The energy unit must be mounted horizontally.